Polycrystalline photovoltaic module X280
Panel X consists of 60 photovoltaic cells (in class A) in polycrystalline silicon which generate high power in each module.
At the end of their lifespan, these modules will not give you any problems because Invent is a member of PV Cycle.
Features X280
CEI EN 61215 (2017)
25 mm ice ball at 23.0 m/s-1 on 11 impact locations. Additional simulation of an impact whose energy is equal to an ice ball measuring 30 mm in diameter.
CEI EN 61215 (2017)
The module is subjected to 5400 Pa. We also carry out an additional test during which the module is subjected to 7500 Pa to ensure perfect resistance.
CEI EN 61730-2 (2018)
5-hour exposure to 1,000 Wm>
CEI EN 61215 (2017)
50 and 200 cycles from -40 °C to +85 °C with STC peak power current during the 200 cycles
CEI EN 61215 (2017)
The module was operated at a temperature of 85 °C with a relative humidity of 85%
CEI EN 61215 (2017)
The module was operated at a temperature of -45 °C with a relative humidity of 85%
IEC62716 (2013)
IEC61701 (2011)
IEC 60068-2-68
Module Data
Module’s Name | X280 | |
Power class | Wp | 280 |
Yearly module production* | kWh | 336 |
Efficiency | % | 17,20 |
TECHNICAL DATA
Nominal tension | Vmp | 31,67 |
Nominal power | A | 8,84 |
No load voltage | Voc | 39,07 |
Short-circuit current | A(Isc) | 9,23 |
Full load voltage | V | 1.000 |
Short-circuit current’s temperature coefficient | Pm | +0,088 %/°C |
No load voltage’s temperature coefficient | Vo | -0,352 %/°C |
Power’s temperature coefficient | Voc | -0,442 %/°CC |
Power tolerance | X280 | 0/+5W |
X300 | 0/+5W | |
NOCT | 45+/-2°C |
Values obtained under standard conditions: 1.000 W/m2 - 25°C - AM 1,5
* Calculated based on the production of the photovoltaic modules in the North of Italy with optimal orientation/inclination estimating a value equal to 1.200 kWh/kWp
